Low alloy Mn-Mo flux cored wire for welding high strength low alloy steels, such as ASTM A302 Grade B, and for casting repair of Mn-Mo castings, such as ASTM A49, A291 and A735.
AWS: A5.29 (E100T5-D2)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy flux cored wire for joining and repair of AISI 4130, 8630, 8630 modified, and other Q&T steels that require PWHT. Typically used for oilfield equipment (BOP and subsea components), alloy forging and casting repair, and stamping dies and equipment.
AWS: A5.29 (E101T1-GM)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy 2% Ni – 0.25% Mo flux cored welding wire for high strength low alloy steels such as A514 and HY100. This wire is ideal for applications requiring high strength and low temp toughness.
AWS: A5.29 (E101T1-K3)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy 2% Ni – 0.5% Mo – 0.5% Cr flux cored welding wire for ASTM A514, A517, HY100 and similar Q&T high strength low alloy steels.
AWS: A5.29 (E110T5-K4)
Process: FCAW
Alloy Type: HSLA, Low Alloy
High strength and low-temp toughness FCAW wire ASTM A-148, A-352, A-487, and similar.
AWS: A5.29 (E120T5-GC)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy Ni-Mo-Cr flux cored welding wire for ASTM A514, A517, HY100 and similar Q&T high strength low alloy steels.
AWS: A5.29 (E120T5-K4)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy FCAW wire for use in joining and repair for ASTM A148, A643, A757, HY-130, LQ-130, and Weldox 960 steels. Typical applications include alloy forging and casting repair, and fabrication and repair of heavy equipment and machinery.
AWS: A5.29 (E140T5-GM)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy flux-cored wire for joining and repair of HSLA steels with similar recorded strength levels. Product provides high tensile and yield, with average impact strength greater than 20 ft-lbs at -40F.
AWS: A5.29 (E150T5-GC)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy Ni-Mo flux cored wire for heavy equipment and structural applications involving high strength low alloy steels, such as HY80, HY100, ASTM A710, A514, and similar.
AWS: A5.29 (E90T5-K2)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy flux cored wire for joining and repair of AISI 4130, 8630, 8630 modified, and Q&T steels that require PWHT. Mechanicals boast high yield and tensile strength after PWHT, with hardness less than 235 Brinell.
AWS: A5.29 (E91T1-GC), A5.29 (E91T1-GM)
Process: FCAW
Alloy Type: HSLA, Low Alloy
