Skip to content

5808 FM 3455, Navasota, TX 77868

Mon-Fri: 8am – 4pm CST

Menu

Alloy Type: HSLA

We offer a comprehensive range of high-strength, low-alloy (HSLA) welding fillers that exhibit industry-leading strength and consistency. Our premium range of HSLA fillers include options for GMAW, GTAW, SAW and SMAW applications. We offer certified HSLA product options that are optimized for virtually every type of common metal used in the industry, from AISI 4340 to a multitude of ASTM steels including A148, A643 and A787.

DevCor 90-D2-M

Low alloy Mn-Mo metal cored wire for welding high strength low alloy steels, such as ASTM A302 Gr. B, and repair of Mn-Mo castings, such as ASTM A49, A291 and A735.
AWS: A5.28 (E90C-D2)
Process: GMAW
Alloy Type: HSLA, Low Alloy

DevCor 90-K3-M

Low alloy Ni-Mo metal cored wire for welding of HY80, HY100, ASTM 710, A678, A514, A517 and similar high strength steels where low temp toughness is required.
AWS: A5.28 (E90C-K3)
Process: GMAW
Alloy Type: HSLA, Low Alloy

DevCor 90NC-S HT+

Low alloy submerged arc wire designed for joining and repair of AISI 4130, 8630, 8630 modified and Q&T steels that require PWHT cycles. Nickel < 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy

DevShield 10018-D2 SR+

High strength, low alloy electrode for welding F22, 4130, and similar quenched and tempered steels. This electrode was designed to meet NACE MR0175 requirements of <1% Ni and max 22 HRc with stress-relief up to twelve hours.
AWS: A5.5 (E10018-D2)
Process: SMAW
Alloy Type: HSLA, Low Alloy

DevShield 10018M

High strength low alloy stick electrode for fabrication of high strength low alloy steels, such as HY80, HY90, HY100, T-1, AR, and others grades of similar strength.
AWS: A5.5 (10018M)
Process: SMAW
Alloy Type: HSLA, Low Alloy

DevShield 100XX-D2

Low alloy stick electrode for fabrication and repair of F22, 4130, and similar quenched and tempered steels. Applications include casting repair and fabrication and boiler and pressure vessel fabrication Available as DevShield 10016-D2 or 10018-D2.
AWS: A5.5 (10018-D2), A5.5 (E10016-D2)
Process: SMAW
Alloy Type: HSLA, Low Alloy

DevShield 11018M

High strength low alloy stick electrode for joining and repair of HSLA steels, such as HY80, HY90, HY100, and T-1 steels most often used in military applications.
AWS: A5.5 (E11018M)
Process: SMAW
Alloy Type: HSLA, Low Alloy

DevShield 12018M

High strength, low alloy stick electrode for fabrication of high strength steels such as ASTM A514 (overmatch), Weldox 960 (undermatch). Typical applications include alloy casting repair, forging repair, and heavy equipment fabrication and repair.
AWS: A5.5 (E12018M)
Process: SMAW
Alloy Type: HSLA, Low Alloy

DevShield 14018

Ultra high strength, low alloy covered electrode for joining and repair of ASTM A148, A643, A787 and similar variations.
AWS: A5.5 (E14018-G)
Process: SMAW
Alloy Type: HSLA, Low Alloy

DevShield 15018

Ultra high strength, low alloy electrode for use in joining and repair of ASTM A148, A643, HY130, LQ130 and similar variations where mechanical properties are comparable. Applications include alloy forging and casting repair and fabrication and repair of heavy equipment, such as cranes, crane booms, excavators, and mining equipment.
AWS: A5.5 (15018-G)
Process: SMAW
Alloy Type: HSLA, Low Alloy