Low alloy Ni-Mo metal cored wire for joining and repair of high strength applications requiring 80-110 ksi yield, such as HY100, ASTM A514 and A517 steels.
AWS: A5.28 (E100C-K3)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Metal cored wire for joining and repair of AISI 4130 without a quench and temper, only stress relief. Ni > 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.28 (E100C-G)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Low alloy submerged arc wire for joining and repair of AISI 4130, 8630, 8630 modified and Q&T steels that require PWHT. High strength and low temperature toughness after extended PWHT.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
Low alloy Ni-Mo-Cr metal cored wire for welding of high strength low alloy steels that require a minimum of 110 ksi tensile strength, such as A514, HT100 and armor plate.
AWS: A5.28 (E110C-K4)
Process: GMAW
Alloy Type: HSLA, Low Alloy
High strength and low-temp toughness SAW wire for high strength steels requiring stress relief.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy composite GMAW wire recommended for the joining and repair of HSLA steels with similar recorded strength levels, such as ASTM A148, A643, A757, HY130, LQ130 and Weldox 960 steels.
AWS: A5.28 (E140C-G)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy composite wire recommended for the joining and repair of HSLA steels with similar recorded strength levels, such as ASTM A148, A643, A757, HY130, LQ130 and Weldox 960 steels.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
Metal-cored cut length wire for manual TIG welding. HSLA for join and repair of AISI 4340 and similar forgings without re-quench and temper.
AWS: A5.28 (E160C-G)
Process: GTAW
Alloy Type: HSLA, Low Alloy
A high strength, low alloy SAW wire recommended for joining AISI 4130, 8630 and variations thereof. This wire was specifically designed for welding Q&T steels that will undergo PWHT. Combined with appropriate flux will yield 100ksi UTS, 100 avg ft-lb at -20F, while still adhering to NACE MR0175
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
Low alloy Cr-Mo metal cored wire for 2.25% Cr – 1% Mo steels, such as ASTM A327 Gr. 22, and for joining dissimilar combinations of Cr-Mo and carbon steels.
AWS: A5.28 (E90C-B3)
Process: GMAW
Alloy Type: HSLA, Low Alloy
