1.5% Ni – 0.35% Mo flux cored welding wire for offshore, structural, and industrial applications. This wire was designed for low alloy steels with 80-110 ksi tensile requirement, such as HY80, HY100, ASTM A710, A514, and similar steels.
AWS: A5.29 (E80T5-K2)
Process: FCAW
Alloy Type: Low Alloy
Low alloy flux cored wire with 2% Ni for fabrication and repair of ASTM A302, A572, A588, and A734. This wire is ideal for structural applications where high strength and low temp toughness is necessary.
AWS: A5.29 (E80T5-Ni2)
Process: FCAW
Alloy Type: Low Alloy
AWS: A5.29 (E80T5-Ni3)
Process: FCAW
Alloy Type: Low Alloy
Low alloy flux cored welding wire for welding 9% Cr – 1% Mo steels such as A335-P9 and A213-T9. Commonly used in high temperature service, petrochemical, and petroleum industries.
AWS: A5.29 (E81T1-B8)
Process: FCAW
Alloy Type: Low Alloy
Low alloy flux cored wire for structural applications with high strength low alloy steels with 1% Ni, such as ASTM A302 and A734.
AWS: A5.29 (E81T1-Ni1)
Process: FCAW
Alloy Type: Low Alloy
Low alloy Cr-Mo flux cored wire for fabrication and repair of high strength low alloy steels, such as P5A, ASTM A335-P22, A387 Grade 22, and similar.
AWS: A5.29 (E90T5-B3)
Process: FCAW
Alloy Type: Low Alloy
High strength, low alloy flux cored wire for 9Cr-1Mo steels, such as ASTM A387 Grade 91, A335 P91 piping, and A213 T91. Wire was designed for the repair and maintenance of castings per ASME SA-217 Grade C12A.
AWS: A5.29 (E90T1-B9C-H4)
Process: FCAW
Alloy Type: Low Alloy
Low alloy Mn-Mo flux cored wire for casting repair of ASTM A49, A291, and A735, and for welding of high strength low alloy steels, such as A302 Gr. B.
AWS: A5.29 (E90T5-D2)
Process: FCAW
Alloy Type: Low Alloy
Low alloy Ni-Mo flux cored wire for heavy equipment and structural applications involving high strength low alloy steels, such as HY80, HY100, ASTM A710, A514, and similar.
AWS: A5.29 (E90T5-K2)
Process: FCAW
Alloy Type: HSLA, Low Alloy
Low alloy flux cored wire for joining and repair of AISI 4130, 8630, 8630 modified, and Q&T steels that require PWHT. Mechanicals boast high yield and tensile strength after PWHT, with hardness less than 235 Brinell.
AWS: A5.29 (E91T1-GC), A5.29 (E91T1-GM)
Process: FCAW
Alloy Type: HSLA, Low Alloy
