Low alloy Ni-Mo metal cored wire for joining and repair of high strength applications requiring 80-110 ksi yield, such as HY100, ASTM A514 and A517 steels.
AWS: A5.28 (E100C-K3)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Metal cored wire for joining and repair of AISI 4130 without a quench and temper, only stress relief. Ni > 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.28 (E100C-G)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Low alloy Ni-Mo-Cr metal cored wire for welding of high strength low alloy steels that require a minimum of 110 ksi tensile strength, such as A514, HT100 and armor plate.
AWS: A5.28 (E110C-K4)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy composite GMAW wire recommended for the joining and repair of HSLA steels with similar recorded strength levels, such as ASTM A148, A643, A757, HY130, LQ130 and Weldox 960 steels.
AWS: A5.28 (E140C-G)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Gas metal arc welding wire for general fabrication of applications including structural, automotive, and robotics.
AWS: A5.18 (E70C-3M)
Process: GMAW
Alloy Type: Carbon Steel
Metal-cored wire for structural fabrication, as well as applications in the automotive and robotics industries.
AWS: A5.18 (E70C-3M)
Process: GMAW
Alloy Type: Carbon Steel
Gas metal arc welding wire for general fabrication of applications including structural, automotive and robotics.
AWS: A5.18 (E70C-6M)
Process: GMAW
Alloy Type: Carbon Steel
Joining and repair of 0.5% Ni – 0.25% Mo steels and castings.
AWS: A5.28 (E70C-G)
Process: GMAW
Alloy Type: Low Alloy
Low alloy 1.25% Cr – 0.5% Mo metal cored wire for welding of ASTM A387 Gr. 11 plate, A335 Gr. 11 pipe and steels for elevated temperature and corrosive service.
AWS: A5.28 (E80C-B2)
Process: GMAW
Alloy Type: Low Alloy
Low alloy Cr-Mo metal cored wire for welding 5% Cr – 1% Mo steels.
AWS: A5.28 (E80C-B6)
Process: GMAW
Alloy Type: Low Alloy
