A high strength, low alloy SAW wire recommended for joining AISI 4130, 8630 and variations thereof. This wire was specifically designed for welding Q&T steels that will undergo PWHT. Combined with appropriate flux will yield 100ksi UTS, 100 avg ft-lb at -20F, while still adhering to NACE MR0175
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
A metal-cored GTAW electrode designed to join and repair AISI 4130 steel and similar steels without re-quench and temper, using only a stress-relief. Nickel < 1.0% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.28 (E80C-G)
Process: GTAW
Alloy Type: Low Alloy
Low alloy Cr-Mo metal cored wire for 2.25% Cr – 1% Mo steels, such as ASTM A327 Gr. 22, and for joining dissimilar combinations of Cr-Mo and carbon steels.
AWS: A5.28 (E90C-B3)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Low alloy Mn-Mo metal cored wire for welding high strength low alloy steels, such as ASTM A302 Gr. B, and repair of Mn-Mo castings, such as ASTM A49, A291 and A735.
AWS: A5.28 (E90C-D2)
Process: GMAW
Alloy Type: HSLA, Low Alloy
Low alloy Ni-Mo metal cored wire for welding of HY80, HY100, ASTM 710, A678, A514, A517 and similar high strength steels where low temp toughness is required.
AWS: A5.28 (E90C-K3)
Process: GMAW
Alloy Type: HSLA, Low Alloy
A metal-cored GMAW electrode designed to join and repair AISI 4130 steel and similar steels without re-quench and temper, using only a stress-relief. Ni < 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.28 (E90C-G)
Process: GMAW
Alloy Type: Low Alloy
Low alloy submerged arc wire designed for joining and repair of AISI 4130, 8630, 8630 modified and Q&T steels that require PWHT cycles. Nickel < 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
A low alloy Cr-Ni-Mo metal-cored wire for SAW welding of structural steels and other high strength steels.
AWS: A5.23 (ECF5)
Process: SAW
Alloy Type: Low Alloy
Metal-cored sub-arc wire for fabrication and repair of structural steels, pressure vessels, and wind towers. Product is comparable to solid wire AWS A5.17 EM12K when paired with select fluxes.
AWS: A5.17 (EC1)
Process: SAW
Alloy Type: Carbon Steel
Metal-cored sub-arc wire for fabrication and repair of structural steels, pressure vessels, and wind towers. Product is comparable to solid wire AWS A5.17 EM13K when paired with select fluxes.
AWS: A5.17 (EC1)
Process: SAW
Alloy Type: Carbon Steel
