Low alloy submerged arc wire for joining and repair of AISI 4130, 8630, 8630 modified and Q&T steels that require PWHT. High strength and low temperature toughness after extended PWHT.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
High strength and low-temp toughness SAW wire for high strength steels requiring stress relief.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy composite wire recommended for the joining and repair of HSLA steels with similar recorded strength levels, such as ASTM A148, A643, A757, HY130, LQ130 and Weldox 960 steels.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
A low hydrogen SAW wire for joining and repair of 0.5% Ni – 0.25% Mo steels. This wire exhibits great properties in the as welded condition, as well as with extended post-weld heat treat.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: Low Alloy
A high strength, low alloy SAW wire recommended for joining AISI 4130, 8630 and variations thereof. This wire was specifically designed for welding Q&T steels that will undergo PWHT. Combined with appropriate flux will yield 100ksi UTS, 100 avg ft-lb at -20F, while still adhering to NACE MR0175
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
Low alloy submerged arc wire designed for joining and repair of AISI 4130, 8630, 8630 modified and Q&T steels that require PWHT cycles. Nickel < 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
A low alloy Cr-Ni-Mo metal-cored wire for SAW welding of structural steels and other high strength steels.
AWS: A5.23 (ECF5)
Process: SAW
Alloy Type: Low Alloy
Metal-cored sub-arc wire for fabrication and repair of structural steels, pressure vessels, and wind towers. Product is comparable to solid wire AWS A5.17 EM12K when paired with select fluxes.
AWS: A5.17 (EC1)
Process: SAW
Alloy Type: Carbon Steel
Metal-cored sub-arc wire for fabrication and repair of structural steels, pressure vessels, and wind towers. Product is comparable to solid wire AWS A5.17 EM13K when paired with select fluxes.
AWS: A5.17 (EC1)
Process: SAW
Alloy Type: Carbon Steel
209 metal-cored wire for welding UNS S20910 base metal, welding dissimilar alloys, and overlay on mild steel. Alloy includes 0.2% nitrogen for increased strength and improved corrosion resistance.
AWS: A5.22 (EC209)
Process: SAW
Alloy Type: Stainless
