Low alloy Ni-Mo metal cored wire for welding of HY80, HY100, ASTM 710, A678, A514, A517 and similar high strength steels where low temp toughness is required.
AWS: A5.28 (E90C-K3)
Process: GMAW
Alloy Type: HSLA, Low Alloy
A metal-cored GMAW electrode designed to join and repair AISI 4130 steel and similar steels without re-quench and temper, using only a stress-relief. Ni < 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.28 (E90C-G)
Process: GMAW
Alloy Type: Low Alloy
Low alloy submerged arc wire designed for joining and repair of AISI 4130, 8630, 8630 modified and Q&T steels that require PWHT cycles. Nickel < 1% and hardness Vickers < 250 for NACE MR0175 adherence.
AWS: A5.23 (ECG)
Process: SAW
Alloy Type: HSLA, Low Alloy
A low alloy Cr-Ni-Mo metal-cored wire for SAW welding of structural steels and other high strength steels.
AWS: A5.23 (ECF5)
Process: SAW
Alloy Type: Low Alloy
High strength, low alloy electrode for welding F22, 4130, and similar quenched and tempered steels. This electrode was designed to meet NACE MR0175 requirements of <1% Ni and max 22 HRc with stress-relief up to twelve hours.
AWS: A5.5 (E10018-D2)
Process: SMAW
Alloy Type: HSLA, Low Alloy
High strength low alloy stick electrode for fabrication of high strength low alloy steels, such as HY80, HY90, HY100, T-1, AR, and others grades of similar strength.
AWS: A5.5 (10018M)
Process: SMAW
Alloy Type: HSLA, Low Alloy
Low alloy stick electrode for fabrication and repair of F22, 4130, and similar quenched and tempered steels. Applications include casting repair and fabrication and boiler and pressure vessel fabrication Available as DevShield 10016-D2 or 10018-D2.
AWS: A5.5 (10018-D2), A5.5 (E10016-D2)
Process: SMAW
Alloy Type: HSLA, Low Alloy
High strength low alloy stick electrode for joining and repair of HSLA steels, such as HY80, HY90, HY100, and T-1 steels most often used in military applications.
AWS: A5.5 (E11018M)
Process: SMAW
Alloy Type: HSLA, Low Alloy
High strength, low alloy stick electrode for fabrication of high strength steels such as ASTM A514 (overmatch), Weldox 960 (undermatch). Typical applications include alloy casting repair, forging repair, and heavy equipment fabrication and repair.
AWS: A5.5 (E12018M)
Process: SMAW
Alloy Type: HSLA, Low Alloy
Ultra high strength, low alloy covered electrode for joining and repair of ASTM A148, A643, A787 and similar variations.
AWS: A5.5 (E14018-G)
Process: SMAW
Alloy Type: HSLA, Low Alloy
